Stacker truck is a variety of wheeled handling vehicles for loading, unloading, stacking, palletizing, and short-distance transportation operations for palletized goods. Stacker trucks are also called stacker trucks and pallet stacker trucks.
The stacker crane is divided into manual stacker crane and electric stacker crane, of which, the electric stacker crane is divided into semi-electric and full electric. Suitable for narrow aisles and limited space operations, it is an ideal tool for loading and unloading, and stacking palletized goods in elevated warehouses, supermarkets, and workshops.
Product features: Used for picking goods, can be lifted with a person.
Can be lifted with a person.
Used for cargo picking.
The product features an Electric lift. Small turning radius.
Small turning radius, suitable for the narrow passage.
Easy to operate, electric control for lifting and lowering.
The product features a small turning radius and flexible and convenient operation. Can use a double-sided pallet. Small turning radius, suitable for the narrow aisle.
Convenient operation, electric control for lifting and lowering.
Can use double-sided pallets
The product features a small turning radius and flexible and convenient operation.
Product features: lifting height up to 5.8m
The maximum lifting height can reach 5.8m
Reinforced counterweight to prevent overturning
High gantry, standard type High gantry with wide legs
Universal forklift with a wide and flexible application range
Capable of working in narrow aisles with limited space
Ergonomic side seat design with wide operator's view
The traditional stacker crane has the hydraulic device operating lever installed in the chassis position, which is very inconvenient to operate
Pedestrian type is a pedal-less electric stacker with a general load of about 1~1.5 tons.
It is suitable for short-distance handling, stacking, and shifting.
Electric stacker trucks include all-electric stacker trucks, semi-electric stacker trucks, forward-moving stacker trucks, forward-moving all-electric stacker trucks, forward-moving stacker trucks, and walking counterbalance stacker trucks. Electric stacker trucks are widely used in factory workshops, warehouses, distribution centers, and distribution centers, ports, stations, airports, freight yards, etc., and can enter the ship's hold, carriage, and container for pallet cargo loading and unloading, handling operations. It is a piece of indispensable equipment for pallet transportation and container transportation.
Selection of electric stacker models and configurations.
(1) Select an electric stacker truck according to the operation function
The basic operating functions of electric stacker trucks are divided into horizontal handling, stacking/picking, loading/unloading, and picking. The operational functions to be achieved by the company can be initially determined from the Company from the Company's product range. In addition, special operational functions will affect the specific configuration of the stacker crane, such as handling of paper rolls, iron, water, etc., which require the stacker crane to be installed with the generators to complete the special functions.
(2) According to the operation requirements, the operational requirements of the electric stacker truck include the general requirements such as pallet or cargo specifications, lifting height, operation channel width, climbing degree, etc. It is also necessary to consider the operation habits (such as the habit of sitting or standing driving), operation efficiency (the efficiency of different models is different), and other requirements.
(3) Select an electric stacker truck according to the operating environment
If the enterprise needs to carry goods or warehouse environment requirements for environmental protection such as noise, the selection of models and configuration should be considered. If it is in the cold storage or in an environment with explosion-proof requirements, the configuration of the stacker crane should also be cold storage type or explosion-proof type. Carefully examine the process of stacker crane operation, the locations to be passed, and envisage possible problems, for example, whether the door height has any influence on the stacker crane when entering and leaving the warehouse; when entering and leaving the elevator, the influence of the elevator height and bearing on the stacker crane; when operating on the upper floor, whether the floor bearing meets the corresponding requirements, and finally consider all factors to decide the final electric stacker crane model and technical parameters.
Before use, carefully check the vehicle's hydraulic pipeline for oil leakage, the support wheel can work normally, there is no blocking phenomenon, and it is strictly prohibited to use a faulty car. Open the electric door lock, and check the universal meter on the dashboard to observe whether the battery has power if the left end of a grid light indicates that the battery has no power. Check whether the vehicle lifting, descending and other actions are normal.
Open the electric door lock, pull the car to the pile of goods near the down button, adjust the height as slowly as possible into the chassis of the goods, press the up button to 200-300mm from the ground, pull the vehicle to move to the need to stack the shelves, press the up button to rise to the appropriate height of the shelves and then slowly move the goods to the exact location of the shelves, press the down button to carefully place the goods on the shelves, move out of the vehicle.
Open the electric door lock, pull the vehicle to the vicinity of the shelf, press the up button to the appropriate position of the shelf, insert the fork slowly into the chassis of the goods, press the up button to lift the goods 100mm height from the shelf, slowly move the vehicle to move the goods out of the shelf, press the down button to 200-300mm height from the ground, pull the vehicle away from the shelf to move to the place where the goods need to be stacked, carefully put down the goods and move out of the vehicle.
Keep the surface of the vehicle clean, once a month for mechanical, hydraulic, and electrical maintenance
In order to ensure the service life of the battery, where the battery should be in a fully charged state, charging an insufficient battery can not be used. Charging attention to the positive and negative power supply can not be reversed, the use of special chargers, the general charging time of 15 hours, under normal circumstances, Monday, Wednesday, Friday 17:00 pm to start charging, the next morning 8:00 amend, to avoid overcharging.
1, The altitude should not exceed 1000m
2, The surrounding air temperature shall not exceed +40℃, not less than -25℃
3, When the ambient temperature is +40℃, the relative humidity shall not exceed 50%, at lower temperatures, a larger relative humidity is allowed
4, Hard, flat ground
5, Prohibit the use of the car in a corrosive environment such as flammable and explosive or acid and alkali
6, Do not allow pushing or pulling the car to walk in the process of rising and falling, and do not allow rising or falling when walking
7, the handling of goods in the process of slow and smooth operation, handling goods to prevent the goods tilt to hit others
8, must pay attention to the weight of the goods can not exceed one ton
9, the implementation of the goods must be lowered to a low level, the speed can not be too fast. The direction of travel should be stable, turning direction when turning to slow
10, Be careful of electric shock when charging.
Forklift China Hydraulic Electric Pallet Stacker
Storage Battery Stacker Semi Electric Pallet Stacker
Hydraulic Electric Straddle Stacker Forklift